Electronic Product Design Services

Electronics engineered with the product, not after it.

Jackson Hedden is a hardware design firm that designs the electronics inside physical products, including schematics, PCB layout and firmware, alongside the industrial and mechanical design, so the whole product is ready for production.

Electrical design is more than wiring and boards. It's about solving real problems while preparing for manufacturing. From component selection and power strategy to DFM and scalable PCBA, our process reduces risk, speeds up time to market and cuts costly rework.

Electrical Design

|

Electrical Design |

What's included

  • Requirements, architecture and component selection
  • Schematic design and PCB layout
  • Firmware and embedded software developed in parallel with hardware
  • Power management, batteries and charging
  • Prototype boards, bring-up and validation testing
  • Design for manufacturing (DFM) and PCBA (assembled circuit board) production support

Talk to us about your electronics

Electronic product development, built for production

Electronic product development is the work of designing the circuits, boards and code that make a product function, then proving they work reliably and can be manufactured at scale. Our team ties user needs and business goals to the electronics, so the product performs well and is realistic to build.

Because the electronics are designed by the same team as the enclosure, board shape, connectors, buttons, antennas, heat and battery placement are decided together. That's often where products with separately designed electronics run into trouble. See our industrial design firm page for the product design side.

Our electronic product design process

  1. Requirements and architecture. We define what the electronics must do, the power budget, connectivity, size limits and target cost.
  2. Schematic and component selection. We choose parts for performance, cost and availability, and design the circuits.
  3. PCB layout. We lay out the board to fit the enclosure and manufacturing process.
  4. Firmware. We develop embedded software in parallel with the hardware.
  5. Prototype and bring-up. We build prototype boards, power them up, debug and refine. See prototype development.
  6. Validation. Many electronic products go through EVT and DVT. EVT (engineering validation test) checks the engineering works; DVT (design validation test) checks the final design meets its requirements. We run functional and stress testing at these stages.
  7. Production handoff. We prepare manufacturing files and support PCBA suppliers and manufacturing.

What this means if you're planning an electronic product

  • Decide on connectivity and power early. Wi-Fi, Bluetooth, cellular and battery size all shape the enclosure, cost and certification path.
  • Plan for certification. Products with radios or batteries usually need regulatory testing before sale, so design with that in mind from the first board.
  • Watch component availability. Choosing parts with multiple sources and long lifespans helps avoid redesigns later.
  • Expect more than one board revision. Most products need several prototype board spins before production.

Further reading

For a look at how AI tools are starting to affect electronics prototyping, read our post on AI-designed electronics prototypes. For a wearable example, see Aina's AI ring.

See our full product development services.

Home Plunge cold plunge  A man is sitting in a modern white bathtub with a faucet and a digital device in a blue-lit room.
uroshock Modern kitchen sink with a metallic faucet and two small parts, wood cutting board, and a brown textured backsplash
Atoll Art Two digital art display booths with digital art; one showing cityscape at night, the other showing a close-up of a woman's face. Four mannequins, two white and two dark, stand nearby, and a person on the right character is viewing a tablet.

Electrical Services

|

Electrical Services |

A wireless earbuds case standing upright with a transparent charging case and a white strap labeled S01 in the background.

printed circuit board design

firmware

schematic Documentation

Custom electronics

Electronic product design approach

Custom electronics

We design from the ground up, developing schematics, PCB layouts and component strategies for performance, reliability and manufacturability.

Firmware alongside hardware

Our firmware and embedded software development runs in parallel with the hardware, so the two are tightly integrated and ready for updates and scale.

Speed from design to production

We keep design, prototyping and validation moving together, so you can get to market with electronics that are reliable and built to last.

A black and transparent portable coffee mug with a lid, filled with water.
Two cylindrical containers with the brand name 'saalt' on a small marble table, next to a white vase with green leafy branches, and two rolled white towels underneath the table.
A bathroom sink area featuring a modern, pink and black electric toothbrush holder, a black rectangular sink, a gold wall-mounted mirror, a black soap dispenser, three small bottles of toiletries, and a textured wooden wall background.
A black and gold portable electric egg cooker with three cooking trays and a attached carabiner for hanging.
Person in pink patterned shorts and white T-shirt lifting a large black and silver fitness balance board labeled 'sol aqua' indoors.
An older woman with gray hair using a virtual reality headset in a bright, modern living room with plants and furniture.

Client Testimonials

Our partnership transcends business, focusing on artistic growth and trust. We strive to exceed expectations, turning visionary ideas into reality.

A modern outdoor sauna with a wooden exterior and glass door, featuring a logo that reads 'HotWorx' in white.
Two black electronic devices with digital displays on top, one turned on showing a multicolored geometric letter 'C,' and the other off with a blank white display, placed on a white surface.
A drone flying with snow-covered mountains in the background.
A Pilates or fitness studio with equipment and mirrors, illuminated with purple lighting.

Electronic product design FAQs

Let’s build your electronics.

Jackson Hedden is a product design, development and manufacturing firm. We design electronics as part of the whole product, from concept to a production-ready system. See our full product development services.